VHF Federal Incident Response Channels Upload File

From TCBWiki
Jump to: navigation, search

For more information about this file, see the FAQ.

; The most current version of this file can be found on the Internet at
; <http://link-comm.com/tcbwiki/index.php?title=TCB_FAQs>.  Look for the question
; "Is there an easy way to enter a bunch of destinations (radio channels) on more than one TCB?"

; This file can be uploaded to a TCB-2/3/4 to program destinations 1 and following to the 
; public safety and federal incident response channels.  It can be used with Tait 
; 8115 mobile radios.  To upload this file, connect to the TCB
; with a serial cable or using a command line telnet client (HyperTerminal will work for
; either type of connection) and upload this file using the Transfer menu > Send Text File.  
; Note that the settings on the TCB will not be saved unless you explicity save them 
; before powering down (entering "*1234" then "*#" without the quotes is one way).

; Note:  files like this can be created semi-automatically.  To do that, connect to the 
; TCB's serial port (telnet won't work) and enter "*1234", "187 101", "060 0101".  Then
; open a log file from the communications program.  Use RCI to connect to the TCB and 
; set up channels or make any other changes you want to be able to repeat by uploading a 
; file.  When finished, enter "*1234", "187 101", "060 0111".  Then close the log file
; in the communication program and open it in a text editor.  Delete all
; of the stuff except for the commands that follow the TCBx> prompts and (optionally)
; any comments you want to keep (add a ';' before the comments).  All whitespace is ignored.

*1234                           ; Enter password (change this to match your password)
187101                          ; Enter advanced programming mode

194 025 010 0 "2"!              ; Set the destination type to direct frequency
194 025 010 1 "NC1 Calling"!         ; Set the description
194 027 010 0 169.5375!         ; Set the receive frequency
194 027 010 1 164.7125!         ; Set the transmit frequency
194 027 010 5 1!                ; Set the subaudible signaling type to CTCSS
194 027 010 7 167.9!            ; Set the CTCSS frequency
194 027 010 6 1!                ; Enable subaudible for transmit only
194 027 010 4 1!                ; Set the RF transmit power (0 = very low, 1 = low, 2 = med, 3 = high)
194 027 010 3 0!                ; Set the RF modulation bandwidth for 12.5KHz (narrow band)

194 025 011 0 "2"!              ; Set the destination type to direct frequency
194 025 011 1 "IR 1"!         ; Set the description
194 027 011 0 170.0125!         ; Set the receive frequency
194 027 011 1 165.2500!         ; Set the transmit frequency
194 027 011 5 1!                ; Set the subaudible signaling type to CTCSS
194 027 011 7 167.9!            ; Set the CTCSS frequency
194 027 011 6 1!                ; Enable subaudible for transmit only
194 027 011 4 1!                ; Set the RF transmit power (0=very low, 1=low, 2=med, 3=high)
194 027 011 3 0!                ; Set the RF modulation bandwidth for 12.5KHz (narrow band)

194 025 012 0 "2"!              ; Set the destination type to direct frequency
194 025 012 1 "IR 2"!         ; Set the description
194 027 012 0 170.4125!         ; Set the receive frequency
194 027 012 1 165.9625!         ; Set the transmit frequency
194 027 012 5 1!                ; Set the subaudible signaling type to CTCSS
194 027 012 7 167.9!            ; Set the CTCSS frequency
194 027 012 6 1!                ; Enable subaudible for transmit only
194 027 012 4 1!                ; Set the RF transmit power (0=very low, 1=low, 2=med, 3=high)
194 027 012 3 0!                ; Set the RF modulation bandwidth for 12.5KHz (narrow band)

194 025 013 0 "2"!              ; Set the destination type to direct frequency
194 025 013 1 "IR 3"!         ; Set the description
194 027 013 0 170.6875!         ; Set the receive frequency
194 027 013 1 166.5750!         ; Set the transmit frequency
194 027 013 5 1!                ; Set the subaudible signaling type to CTCSS
194 027 013 7 167.9!            ; Set the CTCSS frequency
194 027 013 6 1!                ; Enable subaudible for transmit only
194 027 013 4 1!                ; Set the RF transmit power (0=very low, 1=low, 2=med, 3=high)
194 027 013 3 0!                ; Set the RF modulation bandwidth for 12.5KHz (narrow band)

194 025 014 0 "2"!              ; Set the destination type to direct frequency
194 025 014 1 "IR 4"!         ; Set the description
194 027 014 0 173.0375!         ; Set the receive frequency
194 027 014 1 167.3250!         ; Set the transmit frequency
194 027 014 5 1!                ; Set the subaudible signaling type to CTCSS
194 027 014 7 167.9!            ; Set the CTCSS frequency
194 027 014 6 1!                ; Enable subaudible for transmit only
194 027 014 4 1!                ; Set the RF transmit power (0=very low, 1=low, 2=med, 3=high)
194 027 014 3 0!                ; Set the RF modulation bandwidth for 12.5KHz (narrow band)

194 025 015 0 "2"!              ; Set the destination type to direct frequency
194 025 015 1 "IR 5"!         ; Set the description
194 027 015 0 169.5375!         ; Set the receive frequency
194 027 015 1 169.5375!         ; Set the transmit frequency
194 027 015 5 1!                ; Set the subaudible signaling type to CTCSS
194 027 015 7 167.9!            ; Set the CTCSS frequency
194 027 015 6 1!                ; Enable subaudible for transmit only
194 027 015 4 1!                ; Set the RF transmit power (0=very low, 1=low, 2=med, 3=high)
194 027 015 3 0!                ; Set the RF modulation bandwidth for 12.5KHz (narrow band)

194 025 016 0 "2"!              ; Set the destination type to direct frequency
194 025 016 1 "IR 6"!         ; Set the description
194 027 016 0 170.0125!         ; Set the receive frequency
194 027 016 1 170.0125!         ; Set the transmit frequency
194 027 016 5 1!                ; Set the subaudible signaling type to CTCSS
194 027 016 7 167.9!            ; Set the CTCSS frequency
194 027 016 6 1!                ; Enable subaudible for transmit only
194 027 016 4 1!                ; Set the RF transmit power (0=very low, 1=low, 2=med, 3=high)
194 027 016 3 0!                ; Set the RF modulation bandwidth for 12.5KHz (narrow band)

194 025 017 0 "2"!              ; Set the destination type to direct frequency
194 025 017 1 "IR 7"!         ; Set the description
194 027 017 0 170.4125!         ; Set the receive frequency
194 027 017 1 170.4125!         ; Set the transmit frequency
194 027 017 5 1!                ; Set the subaudible signaling type to CTCSS
194 027 017 7 167.9!            ; Set the CTCSS frequency
194 027 017 6 1!                ; Enable subaudible for transmit only
194 027 017 4 1!                ; Set the RF transmit power (0=very low, 1=low, 2=med, 3=high)
194 027 017 3 0!                ; Set the RF modulation bandwidth for 12.5KHz (narrow band)

194 025 018 0 "2"!              ; Set the destination type to direct frequency
194 025 018 1 "IR 8"!         ; Set the description
194 027 018 0 170.6875!         ; Set the receive frequency
194 027 018 1 170.6875!         ; Set the transmit frequency
194 027 018 5 1!                ; Set the subaudible signaling type to CTCSS
194 027 018 7 167.9!            ; Set the CTCSS frequency
194 027 018 6 1!                ; Enable subaudible for transmit only
194 027 018 4 1!                ; Set the RF transmit power (0=very low, 1=low, 2=med, 3=high)
194 027 018 3 0!                ; Set the RF modulation bandwidth for 12.5KHz (narrow band)

194 025 019 0 "2"!              ; Set the destination type to direct frequency
194 025 019 1 "IR 9"!         ; Set the description
194 027 019 0 173.0375!         ; Set the receive frequency
194 027 019 1 173.0375!         ; Set the transmit frequency
194 027 019 5 1!                ; Set the subaudible signaling type to CTCSS
194 027 019 7 167.9!            ; Set the CTCSS frequency
194 027 019 6 1!                ; Enable subaudible for transmit only
194 027 019 4 1!                ; Set the RF transmit power (0=very low, 1=low, 2=med, 3=high)
194 027 019 3 0!                ; Set the RF modulation bandwidth for 12.5KHz (narrow band)

; continue the pattern here
Personal tools