UHF Public Safety Channels Upload File

From TCBWiki
Jump to: navigation, search

For more information about this file, see the FAQ.

; The most current version of this file can be found on the Internet at
; <http://link-comm.com/tcbwiki/index.php?title=TCB_FAQs>.  Look for the question
; "Is there an easy way to enter a bunch of destinations (radio channels) on more than one TCB?"

; This file can be uploaded to a TCB-2/3/4 to program destinations 1 and following to the 
; public safety and federal incident response channels.  It can be used with Tait 
; 8115 mobile radios.  To upload this file, connect to the TCB
; with a serial cable or using a command line telnet client (HyperTerminal will work for
; either type of connection) and upload this file using the Transfer menu > Send Text File.  
; Note that the settings on the TCB will not be saved unless you explicity save them 
; before powering down (entering "*1234" then "*#" without the quotes is one way).

; Note:  files like this can be created semi-automatically.  To do that, connect to the 
; TCB's serial port (telnet won't work) and enter "*1234", "187 101", "060 0101".  Then
; open a log file from the communications program.  Use RCI to connect to the TCB and 
; set up channels or make any other changes you want to be able to repeat by uploading a 
; file.  When finished, enter "*1234", "187 101", "060 0111".  Then close the log file
; in the communication program and open it in a text editor.  Delete all
; of the stuff except for the commands that follow the TCBx> prompts and (optionally)
; any comments you want to keep (add a ';' before the comments).  All whitespace is ignored.

*1234                           ; Enter password (change this to match your password)
187101                          ; Enter advanced programming mode

194 025 020 0 "2"!              ; Set the destination type to direct frequency
194 025 020 1 "U-Call"!         ; Set the description
194 027 020 0 453.2125!         ; Set the receive frequency
194 027 020 1 453.2125!         ; Set the transmit frequency
194 027 020 5 1!                ; Set the subaudible signaling type to CTCSS
194 027 020 7 156.7!            ; Set the CTCSS frequency
194 027 020 6 1!                ; Enable subaudible for transmit only
194 027 020 4 1!                ; Set the RF transmit power (0 = very low, 1 = low, 2 = med, 3 = high)
194 027 020 3 0!                ; Set the RF modulation bandwidth for 12.5KHz (narrow band)

194 025 021 0 "2"!              ; Set the destination type to direct frequency
194 025 021 1 "U-TAC1"!         ; Set the description
194 027 021 0 453.4625!         ; Set the receive frequency
194 027 021 1 453.4625!         ; Set the transmit frequency
194 027 021 5 1!                ; Set the subaudible signaling type to CTCSS
194 027 021 7 156.7!            ; Set the CTCSS frequency
194 027 021 6 1!                ; Enable subaudible for transmit only
194 027 021 4 1!                ; Set the RF transmit power (0=very low, 1=low, 2=med, 3=high)
194 027 021 3 0!                ; Set the RF modulation bandwidth for 12.5KHz (narrow band)

194 025 022 0 "2"!              ; Set the destination type to direct frequency
194 025 022 1 "U-TAC2"!         ; Set the description
194 027 022 0 453.7125!         ; Set the receive frequency
194 027 022 1 453.7125!         ; Set the transmit frequency
194 027 022 5 1!                ; Set the subaudible signaling type to CTCSS
194 027 022 7 156.7!            ; Set the CTCSS frequency
194 027 022 6 1!                ; Enable subaudible for transmit only
194 027 022 4 1!                ; Set the RF transmit power (0=very low, 1=low, 2=med, 3=high)
194 027 022 3 0!                ; Set the RF modulation bandwidth for 12.5KHz (narrow band)

194 025 023 0 "2"!              ; Set the destination type to direct frequency
194 025 023 1 "U-TAC3"!         ; Set the description
194 027 023 0 453.8625!         ; Set the receive frequency
194 027 023 1 453.8625!         ; Set the transmit frequency
194 027 023 5 1!                ; Set the subaudible signaling type to CTCSS
194 027 023 7 156.7!            ; Set the CTCSS frequency
194 027 023 6 1!                ; Enable subaudible for transmit only
194 027 023 4 1!                ; Set the RF transmit power (0=very low, 1=low, 2=med, 3=high)
194 027 023 3 0!                ; Set the RF modulation bandwidth for 12.5KHz (narrow band)


; continue the pattern here
Personal tools